Description
With a full range of AC current, AC/DC voltage, and frequency measurement functions for basic electrical troubleshooting, the AMP-210 clamp meter with its large backlit display is an excellent amp clamp meter choice. Rated CAT III 600 V, the AMP-210 clamp meter offers True-RMS sensing, fast response processor, non-contact voltage detection, capacitance, resistance and continuity measurements to enhance efficiency and safety in today’s complex electrical environments. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. A low pass filter allows measurement of current and voltage on variable frequency drives (motors with speed controlled by frequency).
Specifications
| AC voltage (True-rms) |
Range: |
0 to 600.0 V |
0 to 1000.0 V |
| Accuracy: |
±1.0% + 5LSD (50 to 60 Hz) |
±0.8% + 5LSD (50 to 60 Hz) |
| DC voltage |
Range: |
0 to 600.0 V |
| Accuracy: |
±1.0% + 5LSD |
| AC+DC voltage |
Range: |
– |
0 to 600.0 V |
– |
0 to 600.0 V |
0 to 1000.0 V |
| Accuracy: |
– |
±1.2% + 7LSD (50 to 60 Hz) |
– |
±1.2% + 7LSD (50 to 60 Hz) |
±1.0% + 7LSD (50 to 60 Hz)
±1.8% + 7LSD (DC 40 to 200 Hz)
±1.2% + 7LSD 200 to 400 Hz) |
| AC current |
Range: |
0 to 600.0 A |
| Accuracy: |
±1.8% + 5LSD (50 to 60 Hz)
±2.0% + 5LSD (100 to 400 Hz) |
| DC current |
Range: |
– |
0 to 600.0 A |
– |
0 to 600.0 A |
0 to 1000.0 A |
| Accuracy: |
– |
±2.0% + 5LSD (DC 50 to 100 Hz) |
– |
±2.0% + 5LSD (DC 50 to 100 Hz) |
±1.8% + 5LSD (DC 50 to 100 Hz) |
| AC+DC current |
Range: |
– |
0 to 600.0 A |
– |
0 to 600.0 A |
0 to 1000.0 A |
| Accuracy: |
– |
±2.2% + 7LSD (DC 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz) |
– |
±2.2% + 7LSD (DC 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz) |
±2.2% + 7LSD (40 to 100 Hz)
±2.5% + 7LSD (100 to 400 Hz) |
| Precise low current AC |
Range: |
0 to 60.00 A |
| Accuracy: |
±1.5% + 5LSD (50 to 60 Hz) |
±1.5% + 5LSD (50 to 60 Hz)
±2.0% + 5LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 5LSD (>20.00 to 60.00 A, 40 to 100 Hz)
±3.0% + 5LSD (>20.00 to 60.00 A, 100 to 100 Hz) |
| Precise low current DC |
Range: |
– |
0 to 60.0 A |
– |
0 to 60.0 A |
0 to 60.00 A |
| Accuracy: |
– |
±2.0% + 5LSD |
– |
±2.0% + 5LSD |
±1.5% + 5LSD (0.00 to 20.00 A)
±3.0% + 5LSD (>20.00 to 60.00 A) |
| Micro amps |
Range: |
– |
– |
0 to 2000 µA |
| Accuracy: |
– |
– |
±1.0% + 5LSD |
| Frequency |
Range: |
5.00 to 999.9 Hz |
| Accuracy: |
±1.0% + 5LSD (600 V range) |
| Range: |
50.0 to 400.0 Hz |
| Accuracy: |
±2.0% + 4LSD (600 A range) |
| Resistance |
Range: |
0.0 to 60.00 kΩ |
| Accuracy: |
±1.0% + 5LSD |
| Capacitance |
Range: |
0.0 to 2500 µF |
| Accuracy: |
±2.0% + 4LSD |
| Continuity beeper |
ON ≤ 10 Ω |
| Off > 250 Ω |
Temperature*
(Type K thermocouple) |
|
– |
– |
-40.0 to 752 °F
-40.0 to 400 °C |
|
– |
– |
±1.0% + 3.0 °F (-40.0 to 14.0 °F)
±1.0% + 1.5 °F (>40.0 to 99.9 °F)
±1.0% + 2.0 °F (100 to 752 °F)
±1.0% + 1.5 °C (-40.0 to 10.0 °C)
±1.0% + 0.8 °C (>-10.0 to 99.9 °C)
±1.0% + 1.0 °C (100 to 400 °C) |
| Non-contact voltage |
10 V to 1000 V AC (50 to 60 Hz) |
| Phase rotation indication |
|
– |
– |
Rotation-R for main supply
Rotation-M for motors |
| Diode test |
|
• |
• |
• |
• |
• |
| Jaw opening |
|
1.18 in (30 mm) |
1.37 in (35 mm) |
1.18 in (30 mm) |
1.37 in (35 mm) |
2.0 in (51 mm) |
| Safty rating |
|
CAT III 600 V |
CAT IV 600V
CAT III 1000 V |
| In-rush current |
|
– |
• |
• |
• |
• |
| Peak hold (Crest) |
|
– |
– |
– |
– |
• |
| Relative zero |
|
• |
• |
• |
• |
• |
| Max/Min/Avg |
|
• |
• |
• |
• |
• |
| Data hold |
|
• |
• |
• |
• |
• |
| Backlight |
|
• |
• |
• |
• |
• |
| Auto power off |
|
• |
• |
• |
• |
• |
| Work light |
|
– |
– |
– |
– |
• |
*Error does not include Type-K thermocouple errors
Videos
AMP-200/300 Series
Learn about the AMP 200 and 300 Series Motor Maintenance Clamps.
Freddy652 –
I borrowed this amp clamp from one of my fellow electricians when my Fluke wasn’t available
I borrowed this amp clamp from one of my fellow electricians when my meter wasn’t available. It actually impressed me because it was lighter & had a good feel in my hand & had about the same ranges as my meter.
✔ Yes, I recommend this product.
Joaquin –
this products is an indispensable tool for an electrician.
I have been using amprobe producta since early 70.
Your amprobes proved to be a very good tools when you are troubleshooting electrical probles. May it be short circuits or over currents.
I had your amprove recorder, which proved invaluable in recording currents in a very delicate situation, where the problem laid on a motor.
Thanks to the recorder it was found.
Thanks for making excellent products
Joaquin
✔ Yes, I recommend this product.
JensenElectrician –
Great value for the money
I was needing a new meter, and when I went shopping for one, I chose the Amprobe Amp-210. I’m very satisfied, and now prefer this meter over the Fluke I had previously. It has a large display, is lightweight, but is also durable. I know this because I’ve dropped it a few times. I would recommend this meter to anyone that needs one.
✔ Yes, I recommend this product.
Cool25 –
Best Ever Affordable Clamp
Lost my Fluke on a job site run to the local store and bought this affordable one to complete the job, very satisfied with it.
Will keep it in my tool box just in case.
✔ Yes, I recommend this product.
Bigpapa –
This product works perfect
I like the equipment for the job that i do its perfect. I like it very much and recomend it to anybody.
✔ Yes, I recommend this product.
dp67 –
Very good product. Very dependable
I have always used fluke meters but the last one I bout o decided to try an amprobe and I am very satisfied with the decision I made. It is very comparable in price with fluke and it is very dependable. I will be buying amprobe from now on
✔ Yes, I recommend this product.
Dylan22 –
This product is simple to use and is built to last a life time
This product is as good as it gets. Its built built to last a a life time very simple to use
✔ Yes, I recommend this product.
LukeBorn –
Electricians best friend
I absolutely love this multimeter. I use it almost everyday for over a year and it still looks almost brand new. I’ve used other brands that started failing within just a couple months. Most start showing signs of wear when the leads start cracking but Amprobe has some of the most quality leads on the market. I will definitely be buying Amprobe again for my future tools.
✔ Yes, I recommend this product.
Kitchenratt –
Love this clamp meter!
Love this clamp meter! I learned the trade on an RS-3 many years ago, if this meter holds up to that standard, then it will be great!,
Lane37 –
Great features
Small enough to put in your back pocket. I like that you can take amp readings then go straight to checking voltages. Pretty durable.
✔ Yes, I recommend this product.
kryhar –
No worries stress free design
This is a wonderful product that you know will get the job done right the first time I never have to second guess the accuracy using this meter. For a light weight reliable product it’s excellent such a great product that someone actually stole it out of my job bag but I will be purchasing a new one soon. Thank you for making my job easier.
✔ Yes, I recommend this product.
ssj3pdl –
Decent product
This product has worked just fine for me. Nothing fantastic, but functions as it should.
✔ Yes, I recommend this product.
Upst8 –
Great
Works great…. very handy and dependable. I’ve dropped it off of a extension ladder and it still works. Has gotten wet. Still works.
✔ Yes, I recommend this product.
Jim65 –
Excellent Product
I found this clamp on meter to be a very reliable and user friendly tool that is with me every day.
I feel that it is a meter that I trust to make my job that much safer.
✔ Yes, I recommend this product.
Halesuk –
All round good product
Broke my kewtech clamp meter and decided to go for one of these. Good bit of kit can’t fault it, light and small and simple to use. Clamps are designed well to go round cables as some meters are awkward to clamp on in tight spaces.
✔ Yes, I recommend this product.
Maintenance –
Excellent tool
At my job as a building maintaining I use this clamp meter constantly and it has never let me down despite all the abuse!
✔ Yes, I recommend this product.
Jeffrich5656 –
Awesome features and user friendly
I love my new meter and I would recommend it to anyone who wants to be safe and accurate
✔ Yes, I recommend this product.