The Amprobe 15XP-B is the right choice for electronics engineers and field service technicians, featuring TTL logic test for digital circuits, diode test for component level troubleshooting, a special 2000 MΩ measurement range, and an integrated tilt stand for convenience on the bench.
| FEATURE | 15XP-B |
| DC Voltage | 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| AC Voltage | 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| Current AC/DC | 200.0 µA, 2.000 mA, 20.00 mA, 200.0 mA, 2 A |
| Resistance | 200.0 Ω, 2.000 kΩ, 20.00 kΩ, 200.0 kΩ, 2.000 MΩ, 20.00 MΩ, 2000 MΩ |
| Continuity beeper | • |
| VolTect™ Non-Contact Voltage Detection | 70 V AC → 600 V AC (50 Hz → 60 Hz) |
| Capacitance | – |
| Frequency | – |
| Temperature | – |
| Logic test | TTL, 20 MHz |
| Battery test | – |
| Specifications | |
| Display | 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999 |
| Polarity | Automatic, positive implied, negative polarity indication |
| Over-range | (OL) or (-OL) is displayed |
| Zero | Automatic |
| Low battery indication | The + is displayed when the battery voltage drops below the operating level |
| Auto power off | Approx. 10 minutes |
| Measurement rate | 2 times per second, nominal |
| Operating environment | 0 °C to 50 °C at <70 % R.H. |
| Accuracy | Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity |
| Power | Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| DC Volt ranges | 200 mV, 2 V, 20 V, 200 V, 600 V Accuracy: ± (0.5 % rdg + 1 dgt) |
| AC Volts (45 Hz to 500 Hz) ranges | 200 mV 2 V, 20 V, 200 V, 600 V Accuracy: ± (1.5 % rdg + 5 dgts) |
| DC Current ranges | 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.0 % rdg + 2 dgt) 2 A, Accuracy ± (2.0 % rdg + 3 dgts) |
| AC Current (45 Hz to 500 Hz) ranges | 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.5 % rdg + 5 dgts) 2 A, Accuracy ± (2.5 % rdg + 5 dgts) |
| Resistance | 200 Ω , 2 kΩ , 20 kΩ , 200 kΩ , 2 MΩ ± (1.0 % rdg + 4 dgts) |
| Resistance | 2000 MO ± {5.0 % (rdg -10 dgts) +20 dgt} |
| Continuity audible indication | Less than 25 Ω |
| Diode test current | 1.2 mA (approximate) ±(1.5 % rdg + 3 dgts) |
| Logic test | TTL |
| Non-contact voltage indicator | Sense voltage 70 V to 600 V AC (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges |
| Datasheet » |
| Product Manual » |
Reviews
There are no reviews yet.