The Amprobe AT-4001-A wire tracer combines innovative technology and features to make wire tracing easy, fast, and precise.
Use this electrical wire tracer for finding wires in walls, tracing energized wires and locating breakers without interrupting power. You can also use it to find energized and de-energized wires, including broken and disconnected wires, and pinpoint shorts and ground faults.
| FEATURE | AT-4001-A | AT-4003-A | AT-4004-A | AT-4005-A |
| Traces energized wires without power interruption. Locates breakers without power interruption. | • | • | • | • |
| Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts and ground faults. | • | • | • | • |
| Traces unenergized open wires (broken or disconnected wire). Pinpoints place where wire is broken. | • | • | • | • |
| Supplied with clamp-on attachment to inject signal without making contact with bare wire. | – | – | • | • |
| Supplied with battery booster to strengthen signal for open tracing. | – | – | – | • |
| KIT CONTAINS: | AT-4001-A | AT-4003-A | AT-4004-A | AT-4005-A |
| Carrying case | Soft SV-1000 | Hard CC-AT-4000 | Hard CC-AT-4000 | Hard CC-AT-4000 |
| Receiver R-4000 | • | • | • | • |
| Transmitter T-4000-A | • | • | • | • |
| 110V Pigtail – banana plug cord set C2901 | • | • | • | • |
| Alligator clip – banana plug cord set C2902 | • | • | • | • |
| Grounding test lead 25-ft. MTL-G | • | • | • | • |
| Alligator clip for ground lead VRC-320 | • | • | • | • |
| Clamp-on transmitter accessory A2202 | – | – | • | • |
| Rechargeable battery pack B2024 | – | – | – | • |
| Battery pack recharger B2025 | – | – | – | • |
| Users manual | • | • | • | • |
| Specifications | |
| Transmitter operating voltage: | 9-300V AC/DC |
| Operating frequency: | 32.786kHz |
| Receiver short mode range: | 20′ in air from the traced wire under test conditions |
| Receiver open mode range: | 12′ in air from the traced wire under test conditions |
| Datasheet » |
| Product Manual » |
Timmer –
This Amprobe product is too sensitive, and very difficult to ID circuits, spot on. The electricians hate to use it.
his Amprobe product is too sensitive, and very difficult to ID circuits, spot on. The electricians hate to use it.
✘ No, I do not recommend this product
Amprobe –
We are sorry you are experiencing issues with the AT-4001-A. If you are finding the product is too sensitive, we recommend increasing the distance from the wire or circuit breaker. This will make it less sensitive.
ren207 –
This product has great features
This product has great features
fast wire track and identification
✔ Yes, I recommend this product.