ACD-50NAV clamp-on power meter offers AC current measurements to 600 A, AC/DC voltage to 1000 V, and wide jaws to accommodate large conductors. This clamp-on multimeter is ideal for industrial power monitoring and verifying system conditions.
It offers a full range of diagnostics including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter.
| FEATURE | ACD-50NAV | ACD-51NAV | ACDC-52NAV | ACD-53NAV | ACDC-54NAV | BEST ACCURACY |
| AC Current | 100.00 A, 600.0 A | 100.00 A, 1000.0 A | +/- (1.5 % rdg + 5 LSD) |
|||
| DC Current | _ | _ | 100.00 A, 600.0 A | _ | 100.00 A, 1000.0 A | +/- (1.5 % rdg + 5 LSD) |
| AC Voltage | 100.00 V, 1000 V | +/- (1.0 % rdg + 5 LSD) |
||||
| DC Voltage | 100.00 V, 1000 V | +/- (0.7 % rdg + 2 LSD) |
||||
| Resistance | 1.0000 KO, 10.00 KO, 100.00 KO | +/- (1.0 % rdg + 3 LSD) |
||||
| Frequency | 20.0 Hz to 10 KHz | +/- (0.5 % rdg +3 LSD) |
||||
| Capacitance | 400.0 µF, 4.000 mF | +/- (1.9 % rdg + 8 LSD) |
||||
| DCµA | _ | 1000.0 µA | _ | _ | _ | +/- (1.7 % rdg + 2 LSD) |
| Temperature | _ | -50 °F → 1832 °F (-50 ºC → 1000 ºC) | _ | _ | -50 °F → 1832 °F (-50 ºC → 1000 ºC) | +/- (1 % rdg + 0.8 ºC) |
| THD (Total harmonics distortion) | 0.1% → 100.0% | +/- (3.0 % rdg + 10 LSD) |
||||
| Individual harmonics | 1 → 25 | _ | ||||
| Power | 10 kW → 600 kW | 10 kW → 1000 kW | +/- (2.5 % rdg + 5 LSD) |
|||
| Power factor | -1.00 → 1.00 | +/- 3 degrees | ||||
| Accommodates conductors | Up to 1.45″ (37 mm) in diameter | Up to 1.60″ (40 mm) in diameter | ||||
Navigator Clamp Meters
Take control with the ACD Navigator Clamp Meters.
| Datasheet » |
| Product Manual » |
MCGsr62 –
This tool is great for phase sequencing
This is very good tool. Wonderful and quick for phase sequencing.
✔ Yes, I recommend this product.
dyomaserg –
This product is great!!!
Used it for more than 1 year now and meter was even flooded, but still working great.
Thank you Amprobe for great tool.
✔ Yes, I recommend this product.
goarmy201 –
In love with this meter.
The longer I use it the better it gets. Im the envy of all my coworkers.
✔ Yes, I recommend this product.
bellaria –
Best Of The Best
My husband uses the all time. He says it is the best of the best!
✔ Yes, I recommend this product.
Bob34 –
Great features
Has a lot of great features for troubleshooting electrical problems. With the rugged design it is an all round great tool.
✔ Yes, I recommend this product.
Cad9 –
Best bang for my buck.
I purchased this meter roughly two years ago,now that I am doing industrial mantiance daily have I learned I made the right choice. The clamp to quickly check scaling on ct’s and draw vs FLA. Inrush capibiltes for checking heater selection on new installs. True rms for weeding out ghost voltages and checking Motor drives. Only wish it would come with silicone leads like a fluke.
✔ Yes, I recommend this product.