Description
With one tool, the Amprobe ECB50A Breaker Tracer, you can perform three types of tests: identify the circuit breaker to an electrical socket, trace AC cables in walls up to 15″, or sort wires in a bundle.
Amprobe ECB50A Circuit Breaker Finder
- Three testers in one:
- Identify circuit breaker to an electrical socket
- Trace AC cables in walls
- Sort wires in a bundle
- Microprocessor controlled
- Coded transmission allows easy separation of transmitter signal
- Audible and visual indicators
- Low battery indicator
- Cable tracing depth – up to 15″
- NEMA 5-15 plug
Specifications
| Transmitter voltage range | 100 V to 250 V |
| Power consumption | Approximately 1 W |
| Frequency range | 50/60 Hz |
| Transmission frequency | Approximately 8 kHz |
| Transmitter frequency | Approximately 10 Hz |
| Receiver tracing depth for fuse identification | Approximately 0 to 10 cm (4 in) depending on local conditions |
| Tracing depth for cable location | Approximately 0 to 40 cm (15 in) depending on local conditions |
What’s Included
- Transmitter
- Receiver
- Batteries (installed)
Resources
| Datasheet » |
| Product Manual » |
buccs407 –
What a great tool
This is a great tool in the field. I use it as an engineer when conducting examinations of new projects
✔ Yes, I recommend this product.
Handyman1959 –
Quick, easy to use.
Too often I find that Circuit breakers are not labeled. Turning off and on all of the breakers until I find th right one is time consuming and I need to reset clocks. I use this tool to get the right circut and label it when I need to work on someones electrical system, It is compact and lightweight and easy to use.
✔ Yes, I recommend this product.
DavidB –
Makes it easy to find the breaker.
I have always had a hard time finding out which outlets went to a specific breaker. This unit takes all the guesswork out and its a lot safer. Flipping breakers on and off to find the right one is a thing of the past.
✔ Yes, I recommend this product.
larrydee47 –
so easy to use
i don’t actually owe one i use my friends all the time so easy to use just plug it in and the buzzer tell you where to look. promblem sovled
✔ Yes, I recommend this product.
Oley –
Easy to Use, Works Well
I enjoy this time-saving device and it is always spot on. Because I do most of my home remodeling projects myself, including having moved an entire wall with outlets in a home I just purchased, this device saves me a lot of energy walking up and down stairs to the outlet and to the breaker box. If you are a homeowner and you don’t own one of these devices, you are making your life a lot more difficult. Check it out, it works great!
✔ Yes, I recommend this product.
buyerrev –
good three in one tester for the price
The tester’s sensitivity has to be ajusted to narrow sensing range , if not it will tone multiple breakers on the side of the target breaker. It would be wise to read the instructions to understand range and sensitivity before use.
✔ Yes, I recommend this product.
mhealy61 –
Has Never Let me Down
Having over 30 years in the electrical business I have used plenty of circuit tracers. A lot of them will get you close or narrow it down to a few circuits to choose from.
The ECB 50A is easy to use and is always on the money.
I would definately recommend it to a friend.
Having both pieces snap together might be a nice improvement.
✔ Yes, I recommend this product.
Christope –
RV Wiring
Worked great at RV Campground to trace hookups to main CB panel. I tried to use it inside my RV and was unable to identify which CB was on a certain circuit.
✘ No, I do not recommend this product