The Amprobe TX900 Microwave Leakage Detector has been designed to assist domestic and commercial appliance engineers with microwave ovens. The Amprobe TX900 can be used to verify if the oven operates in accordance with current standards and regulations.
| Feature | TX900 |
| RF Power sensing range | 0 mW/cm2 → 10 mW/cm2 |
| Nominal detecting frequency | 2.45 GHz |
| Specifications | |
| Display: | 2-1/2 Digit LCD with 10 point bargraph display |
| Power source: | 9 Volt NEDA 1604A / IEC 6LR61 Battery |
| Low battery: | Approx. 6V |
| Nominal current: | 10 mA |
| Sensor – source spacing: | Circular – 5 cm |
| Environmental: | Indoor operation; below 6,562ft (2000m) |
| RF Power sensing range: | 0 to 10 mW/cm2 |
| Nominal detecting frequency: | 2.45 GHz |
| Calibration accuracy: | ± 1dB in plane wave – circular polarization |
| Response to step input: | < 1 sec. |
| Resolution: | 0.1 mW/cm2 |
| Datasheet » |
| Product Manual » |
Aztlanteca –
Importance
This tool is invaluable and important. Recently 2 people close to me were diagnosed with cancer. In today’s environment we are constantly exposed to many harmful substances, entities, and signals. I use this a lot. So far nothing has peaked high in radiation. I have kids and a great family. Thankfully nothing to be concerned about has been detected including at work in my finish construction job.
✔ Yes, I recommend this product.
MIMC –
Disappointed
Fluke/Amprobe no longer supports, services or calibrates. Very disappointed because its only a little over a year old. Worked great but as a medical center or business you have to make certain your test instruments are periodically calibrated.
✘ No, I do not recommend this product