Description
Each Remcon relay has a built-in transformer for unit control. Each relay in the system operates independently from and has no effect upon other relays. Install as little as one relay and operate it with as many switches as is desired.
Amprobe R-115S Remcon Relay Switch
- Momentary switch type relay (3 wire)
- Switches AC power on and off using low voltage control circuit
- Built in transformer, no step down transformers necessary
- Single relay can be controlled by multiple switches and multiple relays can be controlled by single switch
- Light #22 cable can be used to control relay instead of Romex or armored cable – significant time and cost savings
- AC Voltage from 105 to 125 V
- AC Current up to 6.5 A (1/4 HP max. motor load at 120 V)
- Frequency: 60 Hz
- Safe control switching: 10 V DC max. and 10 milliamps max.
Specifications
| R-115S | RC-120S | |
| AC current rating | 6.5 Amps max. Resistive, Tungsten, or Ballast Load, ¼ HP max. Motor Load at 120 V AC. | Resistive, Tungsten, 6.5 Amps max, at 120 VAC, ¼ HP Motor Load. |
| AC voltage rating | 105 to 125 V AC, 50-60 Hz. | |
| Control switching current | 10 milliamps max | |
| Control switching voltage | 10 V DC max. isolated from AC line | |
| Control switch closure time | 5 milliseconds min | |
| Ambient operating temperature | 104 °F (40 °C) max. for full rated output. | |
| Operation | Momentary contact closure of control wires turns AC power ON or OFF. | Contact closure of control wires turns AC power ON. |
Resources
| Datasheet » |
| Product Manual » |
MisterX –
Perfect for restorations!
I’ve come across several old houses built with DC controlled/switched AC branch circuits who’s switching relay’s are finally starting to fail after decades of service, so I was quite relieved to find that Remcon Relay Switches are available.
I’ve used these relays for a few years now with great success, plus they are smaller than the originals so no modifications to the splice box is needed.
Over-all, this is a wonderful product which I recommend to anyone who requires such a relay, in fact I’m just back to purchase another one for a friends house.
✔ Yes, I recommend this product.
joni97 –
Replacing R-115 with R-115S
Just replaced the relay in the hallway light, controlled by 3 separate switches. After searching the attic for the relay, I discovered it was insiide the ceiling box and it was an easy job from then on. The only problem was that the 115S being a different shape than the 115, blocked the screw clearances and it required some adjustment to screw lengths to make it all fit. Very happy with the end result after a year of having no hallway light.
✔ Yes, I recommend this product.
Shadow –
Excellent for the job.
It’s a lot better than the old type, and work more efficiently and last longer.
✔ Yes, I recommend this product.